Showing posts with label CHANDRAYAAN 1 MISSION PROFILE. Show all posts
Showing posts with label CHANDRAYAAN 1 MISSION PROFILE. Show all posts

Sunday, December 7, 2008

LUNAR ORBIT INSERTION-CHANDRAYAAN MISSION PROFILE

Chandrayaan-1 successfully completed the lunar orbit insertion operation on 8th Nov 2008 at 16:51 IST. This manoeuvre involved firing of the liquid engine for 817 seconds (about thirteen and half minutes) when the spacecraft passed within 500 km from the moon. The satellite was placed in an elliptical orbit that passed over the polar regions of the moon, with 7502 km aposelene (point farthest away from the moon) and 504 km periselene (nearest to the moon). The orbital period was estimated to be around 11 hours. With the successful completion of this operation, India became the fifth nation to put a vehicle in lunar orbit.

First orbit reduction

First Lunar Orbit Reduction Manoeuvre of Chandrayaan-1 was carried out successfully on 9 November 2008 at 20:03 IST. During this, the engine of the spacecraft was fired for about 57 seconds. This reduced the periselene from 504 km to 200 km while aposelene remained unchanged at 7,502 km. In this elliptical orbit, Chandrayaan-1 took about ten and a half hours to circle the moon once.

Second orbit reduction

This manoeuvre, which resulted in steep decrease in Chandrayaan-1’s aposelene from 7,502 km to 255 km and its periselene from 200 km to 187 km, was carried out on 10 November 2008 at 21:58 IST. During this manoeuvre, the engine was fired for about 866 seconds (about fourteen and half minutes). Chandrayaan-1 took two hours and 16 minutes to go round the Moon once in this orbit.

Third orbit reduction

Third Lunar Orbit Reduction was carried out by firing the on board engine for 31 seconds on 11 November 2008 at 18:30 IST. This reduced the periselene from 187 km to 101 km, while the aposelene remained constant at 255 km. In this orbit Chandrayaan-1 took two hours and 9 minutes to go round the Moon once

Final orbit

Chandrayaan-1 spacecraft was successfully placed into a mission specific lunar polar orbit of 100 km above the lunar surface on 12 November 2008.In the final orbit reduction manoeuvre, Chandrayaan-1’s aposelene was reduced from 255 km to 100 km while the periselene was reduced from 101 km to 100 km.In this orbit, Chandrayaan-1 takes about two hours to go round the moon once. Two of the 11 payloads – the Terrain Mapping Camera (TMC) and the Radiation Dose Monitor (RADOM) – have already been successfully switched on. The TMC has successfully taken pictures of both the Earth and the moon.

Thursday, November 13, 2008

CHANDRAYAAN REACHED 100 KM FORM LUNAR SURFACE

Matt_dk writes "Today, Chandrayaan-1 spacecraft has successfully reached its intended operational orbit at a height of about 100 km from the lunar surface. This followed a series of three orbit reduction manoeuvres conducted during the past three days by repeatedly firing the spacecraft's 440 Newton Liquid Engine. The next major event of Chandrayaan-1 mission planned in the coming days is the release of Moon Impact Probe (MIP) from the spacecraft and its eventual hitting of the moon's surface."

Tuesday, October 28, 2008

PAYLOAD INFORMATION OF CHANDRAYAAN 1

Scientific Payloads
Chandrayaan-1 is an Indian Mission to the Moon. The indigenously developed payload/ experiments are:
TMC
TMC
Terrain Mapping stereo Camera (TMC) in the panchromatic band, having 5 m spatial resolution and 20 km swath
Read More..
HySi
HySI
Hyper Spectral Imaging camera (HySI) operating in 400-950 nm bands with a spectral resolution better than 15 nm and spatial resolution of 80 m with a swath of 20 km
Read More..
LLRI
LLRI
Lunar Laser Ranging Instrument (LLRI) with height resolution of less than 5 m
Read More..
HEX
HEX
High Energy X-ray spectrometer (HEX) using Cadmium-Zinc-Telluride (CdZnTe) detector in the 30-270 keV energy region with spatial resolution of 33 km
Read More..
MIP
MIP
Moon Impact Probe (MIP) as piggyback on the main orbiter of the Chandrayaan-1 spacecraft, which will impact on the surface of the moon.
Read More..
Apart from the above indigenous payloads/experiments, ISRO solicited proposals through an Announcement of Opportunity (AO) from International and Indian Scientific Community for participating in the mission by providing suitable scientific payloads, complementing the overall Chandrayaan-1 scientific objectives. Out of the proposals received, six experiments were selected for inclusion in Chandrayaan-1 mission; two of the AO payloads, C1XS and SARA are developed by ESA jointly with ISRO.
The AO payloads Onboard Chandrayaan-1 are:
C1XS
C1XS
Chandrayaan-1 X-ray Spectrometer (C1XS) through ESA - a collaboration between Rutherford Appleton Laboratory,UK and ISRO Satellite Centre, ISRO. Part of this payload is redesigned by ISRO to suit Chandrayaan-1 scientific objectives.
Read More..
SIR-2
SIR-2
Near Infra Red spectrometer (SIR-2) from Max Plank Institute for Solar System Science, through Max-Planck Society, Germany and ESA
Read More..
SARA
SARA
Sub keV Atom Reflecting Analyser (SARA) through ESA, from Swedish Institute of Space Physics, Sweden and Space Physics Laboratory, Vikram Sarabhai Space Centre, ISRO. The digital processing unit of this payload/ experiment is designed and developed by ISRO, while Swedish Institute of Space Physics develops the payload.
Read More..
RADOM
RADOM
Radiation Dose Monitor Experiment (RADOM) from Bulgarian Academy of Sciences.
Read More..
Mini SAR
Mini-SAR
Miniature Synthetic Aperture Radar (Mini-SAR) from Applied Physics Laboratory, Johns Hopkins University and Naval Air Warfare Centre, USA through NASA
Read More..
M3
M3
Moon Mineralogy Mapper (M3) from Brown University and Jet Propulsion Laboratory, USA through NASA
Read More..
Summary of Chandrayaan-1 Prime Science Objectives and Wavelength range coverage
Prime Objectives Payload
  • Search for water-ice
  • MiniSAR, HEX, SARA
  • Chemical Mapping
  • C1XS, HEX
  • Mineralogical Mapping
  • HySI, SIR-2, M3
  • Topography Mapping
  • LLRI,TMC
  • Radiation Environment
  • RADOM, HEX, C1XS
  • Magnetic Field Mapping
  • SARA
  • Volatile Transport
  • HEX
  • Lunar Atmospheric constituent
  • MIP

    CHANDRAYAAN 1 MISSION PROFILE

    Mission Sequence
  • Chandrayaan-1 spacecraft would be launched from the Satish Dhawan Space Centre, SHAR, Sriharikota by PSLV-XL (PSLV-C11) in an highly elliptical initial orbit (IO) with perigee (nearest point to the Earth) of about 257 km and an apogee (farthest point from the Earth) of about 22,858 km.
  • After a few revolutions in the initial orbit, the spacecraft's Liquid Apogee Motor (LAM) firing would be done, when the spacecraft is near perigee, to raise the apogees to 37,421 km and 73,925 km respectively.
  • Subsequently, the LAM is fired to take the Chandrayaan-1 spacecraft to extremely high elliptical orbit with apogees 199,277 km and 269,201 km. Later the spacecraft would be raised to an orbit with 1,019 km perigee and 386,194 km apogee.
  • Once the Chandrayaan-1 spacecraft reaches the vicinity of the Moon, the spacecraft is slowed down sufficiently so as to enable the gravity of the moon capture it into an elliptical orbit (LC). After a careful and detailed observation the height of the spacecraft's orbit will be finally lowered to its intended 100 km circular polar orbit. Following this, the Moon Impact Probe (MIP) would be ejected from Chandrayaan-1 to impact on the lunar surface. Afterwards, all the scientific instruments/payloads are commissioned sequentially and Chandrayaan-1 spacecraft explores the Moon with its array of instruments for two years.
    Chandrayaan-1 Mission Phase